Product Brief
The Milling Machine Vice is one of the most popular vices used in workshops, machine shops and shop floor. Apart from use in milling operations, it also finds application in jig boring, grinding and shaping jobs
Manufactured from close grained hi-tensile seasoned cast iron, the vice body has a premium polychrommatic finish which is scratch and rust proof
Vice jaws made from fully hardened and ground tool steel allow the workpiece to be held dead square without use of any packing. This not only improves efficiency and life of jaws but also helps reduce strain on vice body
Usage of high tensile grade 10.8 fasteners provides greater strength and rigidity. The 360° swivel base allows the vice to be set at any angle along the vertical axis. Vice base has a milled slot which helps in accurate location of the vice on the machine table using rectangular locating nuts
"Hold Down" slots allow for secure clamping of the vice on the machine table.
Ordering Information
Cat. Nr. | Ordering Nr. | Jaw Width | Jaw Opening | Jaw Depth | Net Wt. Each | ||||||||||||||
inch | mm | inch | mm | Inch | mm | Kg | |||||||||||||
MMV/SP/50 | 35010 | 2 | 50 | 2 | 50 | 1 | 25 | 3.500 | |||||||||||
MMV/SP/75 | 35014 | 3 | 75 | 3 | 75 | 1-11/32 | 34 | 8.500 | |||||||||||
MMV/SP/100 | 35011 | 4 | 100 | 4 | 100 | 1-1/2 | 38 | 17.400 | |||||||||||
MMV/SP/125 | 35013 | 5 | 125 | 5 | 125 | 1-3/4 | 45 | 27.75 | |||||||||||
MMV/SP/150 | 35012 | 6 | 150 | 6 | 150 | 1-3/4 | 45 | 38.800 | |||||||||||
MMV/SP/200 | 35016 | 8 | 200 | 8 | 200 | 2-9/32 | 58 | 84.00 |